JDiag BT200 Car Battery Tester works for 12 volts vehicles, which is applicable for automotive manufacturers, automotive maintenance and repair workshops, automotive battery factories, automotive battery distributors, and educational organizations, etc.
Main functions of BT200 Battery Tester:
Battery test: analyze the battery healthy status to calculate the actual cold cranking capability of the battery and the aging extent, which provide reliable analysis evidence for the test and maintenance of the battery. It notifies the user to replace battery in advance when the battery getting aged.
Cranking test: analyze the actual required cranking current and cranking voltage of the starting motor.
Charging test: analyze the charging system, including generator, rectifier, rectifier diode, etc., which it give you reliable data for your reference. If one of the above mentioned parts is not in normal situation, it will lead to over charge or incomplete charge of the battery, thus the battery will be quickly damaged and also greatly shorten the using life.
1. Lighter, easy to operate and convenient to collect.
2. The LED screen is bigger and clearer.
3. Increased protection against electric shock,clips are all wrapped.
4. Quick and accurate test result display.
5. Applicable battery: 12V Lead-acid batteries.
6. Test Method: Four-wire Kelvin test.
7. Quick and accurate test result display.
1. Conductance correlates directly to the battery capacity.
2. Passive testing method is safe.
3. Never discharges or drain the battery.
4. Able to test condition of discharged battery.
5. Consistent and repeatable results.
6. Provides unique indication of battery conditions.
7. Provides check the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required.
8. Powers up when connected to the battery posts during testing.
Certificate