2022 IPROG Pro V87 Full Set ECU Key Programmer Iprog+ Eeprom IMMO Car Radio Airbag Reset Dashboard Kilometer DIGIPROG 3 Carprog

Iprog+ Programmer function: Auto key programmer + Airbag Reset Tool + DPF Off + Pin Code Service+ IMMO + EEPROM, etc.

NOT allow to external 12V power supply.

It is easy to burn out when connected to an external power supply 12V(There is no 12V power supply in the package,so customer dont use 12V

The best programmer iprog Pro is designed to work with automotive microelectronics:

✔Working with on OBDII connector
✔Working with on the table through adapters

✔Work with multimedia unlocking the tape recorder

✔Work with keys (IMMO, Transponders), copying, preparation, unlocking

✔Work with IMMO-Key Auto dumps

✔Working with the airbag computer, deleting crash data

✔Transfer readings from miles to km

✔Read and write processors and its used in cars

✔ Removing the particulate filter in the dump

✔Working with keys to the intercom

✔Realign Pin cod from dump (some brands)

Control board number, + scripts full Base number. Ability to update!

All adapters are tested for performance!


IProg is very powerful


Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCU-Atmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC_Cript,ibutton,sd_unlocker,test.


IProg Pro Programmer Function List:

Working with on OBDII connector
Working with on the table through adapters
Work with multimedia unlocking the tape recorder
Work with keys (IMMO, Transponders), copying, preparation, unlocking
Work with IMMO-Key Auto dumps
Working with the airbag computer, deleting crash data
Transfer readings from miles to km
Read and write processors and its used in cars
Removing the particulate filter in the dump
Working with keys to the intercom
Realign Pin cod from dump (some brands)
Control board number, + scripts full Base number. Ability to update!
All adapters are tested for performance!
 

Iprog can replace Key programmer (tango) + Dig-iprog3 + Carprog V8.21

Lastest V85 software

Add Kline adapter+ Can Adapter
And more special functions like :

Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,,EEPROM,MCU-Atmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC_Cript,ibutton,sd_unlocker,test.

IProg Pro Programmer Function List:

Work with multimedia unlocking the tape recorder
Work with keys (IMMO, Transponders), copying, preparation, unlocking
Work with IMMO-Key Auto dumps
Working with the airbag computer, deleting crash data
Transfer readings from miles to km
Read and write processors and its used in cars
Removing the particulate filter in the dump
Working with keys to the intercom
Realign Pin cod from dump (some brands)
Control board number, + scripts full Base number. Ability to update!
All adapters are tested for performance!

IProg Pro Programmer Support OS:
The program is designed to work in the operating systems of the Windows family . The following versions are supported:
Windows xp
Windows vista
Windows 7
Windows 8

Iprog+ Programmer Software Display:

1. Airbag:
Read and erase crash to some cars
Read and erase DTC 
Repair CFG


2. Dashboard:
Read km 
Write a new km


3. Car Radio & ECU:
Car Radio:
Read and erase info 
Reset count

ECU:
Immo OFF 
DPF off 


4. Eeprom:
Read/write/erase eeprom

5. Immo:
Program and copy chips for cars and truck
Unlock keys
Cover Toyota smart keys: reset key prepare
Write a key by immo dump

6. Mcu:
Read and write chips
Cover chips Atmel, Fujitsu and microchips Motorola, NEC v850

7. Special functions:
Mile to km
Pincode from dump

Iprog+ Programmer Connection Display:

Iprog+ Programmer FAQs:
Question:
I have a 2010 GMC terrain , I purchased the car and it has 999999 on the dash board when I scanned it, GDS2 shows me it has 16.7 million miles
my question is I am trying to put the mileage back to original state of 257.000 KM car is Canadian  I am going to be using iprog+  is the info for it in the BCM or the cluster or Both.

Answer:
BCM should be enough, but if the dash does not display new mileage you may need to do both. 24c16 in dash and BCM.

IProg+ Programmer Customers Reviews:
Review 1:
Isuzu Dmax 2010 all key lost done by Iprog+ clone

Review 2:
I ordered one iprog clone, I can cofirm that Iprog+ clone is working perfect on these keys: to reset a used Smartkey of Subaru Impreza (renew, make virgin), it is a DENSO 14ACA Type.

Review 3:
Iprog clone masos for the drop of the car and the car box will be closed dpf egr evap car toyota and Lexus will make the car use the stand.

Review 4:
My iprog+ clone can do good work.
Credits to one DK veteran.

Review 5:
i have iprog Chinese clone and without problem clear all Toyota modules.

Review 6:
Clearing of airbag ECU works though some parts is stuck in Russian.

Review 7:
read pin code smartra3 hyundai h1 2012 bosh edc16--OK, Delphi not ok.
V.82 Ford Transit 2012 mileage correction OBD OK, by obd made this Ford.

Review 8:
I have Iprog clone and i am really satisfied from it.
90% of dashboard and airbag calculations are good.
Today i was made Mazda Airbag unit trough OBD.
It was Infineon XC2361-56F.

IProg+ Programmer Package List:

1pc x iprog+  Main Unit
1pc x RFID 125+134 adapter
1pc x Eeprom adapter
1pc x UARTBDM adapter
1pc x OBD Cable
1pc x USB
1pc x CD
1pc x Can Adapter (Newly Add since Sep 16th, 2019)
1pc x K-line Adapter (Newly Add since Sep 16th, 2019)
1pc x Welding Line (Newly Add since Sep 16th, 2019)