ignition start stop button auto 2 way security car alarm system remote keyless entry central lock unlock car door remote start

ignition start stop button auto car alarm system remote keyless entry central lock unlock car door

product has not pke function,no auto induction lock or unlock car door!!!!

if you need pke funciton,don't buy this product.

remote distance is almost 300-500meters!

if working enviroment is good,remote distance can reach 500-700M

Note:

This product does not have auto start function  this product has remote start stop and push start stop ,,as for package box,we will use any one that we have in stock,thanks

as for this product,you can choose ultrasonic sensor or window closer module or bypass module(you can choose this module if your original car key is chip key) ,if needs this extra part adds extra value 

 

Model No:CD-T171A5S
brand is cardot

Product Bacic Features:

Product Features

Product Paramters:
 

MAIN UNIT

Output current:
signal light 5A*2,
siren 10A, central
lock:10A
Coding:learning code
Voltage:12+2V
Static Current: <15mA( except indicator, sensor)
Indicator Current :20mA intermittently
Shock Sensor Current: < 1mA
Frequency: 300MHz~433 MHz

REMOTE CONTROL

Voltage: 6-12V
Current: 0m A
Frequency: 300MHz~433MHZ
Coding: learning code
Coding times: > 1 million

 
Product compositions:
 
1 main unit,1pc start stop button,2pcs FM LCD alarm remotes,3 groups main cables,1pc start module,1pc shock sensor,1pc LED indicator,1pc alarm electronic siren,1pc killer relay,1pc reset button,1 pc alarm antennas,1pc english manual,1pc color box.
 

Main Unit Installation

The main unit is suggested to placed under the panel. After fixing the main unit in a

suitable place, start connecting the wires in accordance to the WIRE CONNECTING DIAGRAM

before putting back all the parts, simply test the system function first.

Shock Sensor Installation

Install the sensor after fixing the main unit .It is recommended to place the shock sensor

near the car doors, or beside the panel so as to easily detect any intrusion actions. To

adjust the sensitivity of the shock sensor, simply use a screw to turn the button in the

shock sensor, turning right to
adjust with a higher sensitivity or vice verse. Then test the sensitivity by triggering the

shock sensor. If i t triggered, the L.E.D will light up. Please do not directly hit the

shock sensor.

Central Lock Installation Guide

This system can control several common central lock types without any additional parts.
TYPE A:
For cars equipped with no central lock, recommended to install it first. (see FIG 1)
TYPE B:
For cars equipped with central lock but no motor on driver aside, add master motor and rod.
(see FIG 2). This type of installation is applicable to operate factory lock system in some

FORD, Mitsubishi, Mazda, and Nissan models.
*Installation tips: First install the actuator near the door' s manual latch, then fix the

rod of the actuator on the manual latch
TYPE C:
For cars equipped with central lock and with motor on the driver' s side.(see FIG 3)
TYPE D:
The door locks are controlled by electrical activated vacuum pump.(See FIG 4). The timing of

actuator mechanism can be set as 0.7 seconds or 3 seconds at the JP2.
For some Mercedes-benz and Audi models.
TYPED E:
For some cars not mentioned above, please consult your dealers.
NOTE: Type B installation method (FIG 2) is suitable for most of the cars.

Diagnosis:

The remote control does not work.

* Check the battery level. It is suggest to replacing a new battery each year.
* Check if the remote control is moisten or crash.
The remote control does not make the main unit work.
*  Check the battery level in the remote control.
* Check if the remote control is moisten or crash.
* Check if the frequency of the remote control is changed.
* If possible, use another control for comparison. If both of them do not work, then check

the main unit and the wire connection.( Do not open the main unit for checking)
The central lock does not work.
* Check if the actuators are working.
* Check wire connection
* Check if the fuse of the main unit is damaged.
The siren does not sound when the system is triggered.
* Check if the sirens are available.
* Check the wire connection between the siren and main unit.
The siren keeps chirping while the main unit installs.
* Check if the socket is insert or check the wires connection or the CPU safety

fuse.
* If back up battery is used, check if the switch is positioned at ON status.
The alarm sounds 10 seconds after the vehicle is armed, same problem keeps happening again.
* Check if the shock sensor is too sensitive.
* Check if the door pin switches are damaged.
* Check wire connection.
The alarm is easily triggered when a heavy vehicle is passing through.
* Check if the shock sensor is too sensitive.

Wire Diagram:

product photo: