Hantek iDSO1070A Digital Oscilloscope 2 Channels 70Mhz USB iPhone/iPad/Android/Windows PC Osciloscopio Portatil With WIFI Portalbe Oscillograph
*iPhone/iPad/Android/Windows Oscilloscope, Multi-touch Operation.
*WIFI Communication (USB Communication), WIFI Direct Connection/ Router Connection.
*Build-in Lithium Battery with 4 hours endurance, no need of External Power. Floating Measurement is available, safe and convenient.
*70MHz Bandwidth, Real-time Sampling Rate 250MSa/s
*Can be connected with iPad and iPhone at the same time. When operating on iPad, it can also be observed on iPhone.
*Good mechanical design. The outer case is made by the same material with iPad - Anodised aluminium. It has great heat resistance and abrasive resistance with beautiful appearance. The hardness of aluminium alloy surface is greatly improved
*Small size which is convenient for traveling.
*Software Support:IOS,Android,Win10,Win8, Win7, Windows NT ,VISTA, etc.
*More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
*FFT spectrum analyzer
*Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
*The waveform data can be output as EXCEL, BMP, JPG according to time and voltage.
Model
iDSO1070A |
|
Bandwidth |
70MHz |
Channel |
2 CH |
Real-time Sampling Rate |
250MSa/s(singal channel), 125MSa/s(two channels) |
Sampling Mode |
Sampling, Vmax, Vrms |
Average Sampling |
Average waveform, times: 4, 8, 16, 32, 64, 128 |
Memory Depth |
6K |
Rise time |
≤5ns |
Time Base Precision |
±50ppm |
Time Base Range |
45s/div-500s/div (1-2-4 sequences) |
Input Coupling |
DC, AC, GND |
Input Impedance |
Resistance: 1MΩ; Capacitance:25pF |
Probe Attenuation Coefficient Setting |
1×, 10×, 100×, 1000 |
Max Input Voltage |
35Vpk(DC+peak) |
Waveform Interpolation |
Step, Linear, Sin(x)/x |
Input Sensitivity |
10mV/div~5V/div |
Vertical Resolution |
8Bit |
Vertical Displacement Range |
10mV ~ 5V/div @ x1 probe; 100mV ~ 50V/div @ x10 probe; |
1V ~ 500V/div @ x100 probe; 10V ~ 5KV/div @ x1000 probe |
|
Position Range |
±4division |
Low Frequency Response |
≤10Hz(at input BNC) |
DC Gain Accuracy |
±3% |
Bandwidth Limit |
20MHz |
Trigger Mode |
Auto, normal, signal |
Trigger Type |
Edge, Alternative |
Trigger Precision |
±4division |
Trigger Range |
±4V |
Trigger Sensitivity |
0.02 division |
Trigger Source |
CH1, CH2, EXT |
Waveform Signal Process |
+,-,x,÷,FFT, invert |
Temperature |
Operating: 0C-40C-; Non-operating: -20C--60C |
Humidity |
Below 35C, ≤90% relative humidity; 35C-40C, ≤60% relative humidity |
Cursors Measurement |
Cross, Trace, Horizontal, Vertical |
Auto Measurement |
Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
Volume |
190mm * 100mm * 35mm |
Weight |
0.7KG |
Accessory |
2 passive probes -PP80 |