Your position: Home / Original brand tool / Xhorse VVDI Products / Xhorse VVDI Key Programmer

XHORSE VVDI BMW VVDI BIMTOOL PRO Update Version of VVDI Tool for BMW Enhanced Edition for Automotive Maintainers free get CF500 LCD Smart key

TOPSK283
Xhorse VVDI BIMTOOL Pro is designed for both locksmiths and BMW engineers, which can be used for BMW key programming & E/F/G programming / coding / Doip vehicle programming via Ethernet port and more.
Price:
Quantity:
-
+
(14 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Size Chart
  • Measurement
  • Contact us
  • Reviews

2021 New Xhorse VVDI BIM Tool Pro Enhanced Version in Stock Now. Much better than before!


VVDI BIMTool Pro New Features:

 

Add ethernet port, Support 10/100M programming via Ethernet

 

Support WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrad

 

Support DoIP Vehicle/Module Programming

 

Support BMW ECU programming (NBT/CIC) (connect via network cable)

 

Greatly speed up the F/G Chassis programming (connect via network cable)

 

Support BMW E-sys and Rheingold Diagnostic System. Able to replace the specialized devices. (connect via network cable)

 

Support directly read ISN data without disassembling the ECU (N13 / N20 / N55 / N63)

 

Language:English

 

Works on All Windows computer, like win7, win8, win10, no computer operation system limitation.

 


Note:


1. Don't use the Enternet cable and USB cable at the same time.For key programming,use usb cable,coding use Enternet cable.
2. When connect VVDIBIM device with PC, it will display"Booting" on little screen,after 20 secs it will display as "BMW", then it is connected OK.



VVDI BIM Tool Pro Functions:

Functions of VVDI BIM Tool

1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code

2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whold database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code

3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key inforamtion
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key

4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file

5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on ignition without working key

6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key

7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information

8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc

9. Read E-Series/F-Series ECU ISN via OBDII

1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU

10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump

11. CAS repair(OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)

12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version

13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)
14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG


VVDI BIMTOOL Pro Software Display:


VVDI BIMTOOL Pro, VVDI BMW Tool and VVDI2 Comparison Table:

 



Xhorse VVDIBIM PROvsVVDI BMW:

VVDI BIMTOOL Pro Tool Faq:



A: I received the package but Xhorse VVDI BIMTool Pro doesn't work. There was no connection with the car (either via CAN or KLINE bus). I updated the device to the newest software and firmware. any iead?
Q: you should  short the component in the following printed circuit board with a zero-ohm resistor below picture

 

 

VVDI BIM Tool Pro Update Log:

V1.7.3 Software

2021-04-22
Require firmware V1.6.4
BMW V1.7.3
1. Support program not support unlock FEM/BDC directly, After programming can do unlock function
2. Bugfix for E-Series programming
3. Improvement for F/G-Series programming and coding
4. Bugfix


Package List:


1pc * VVDI BIMTool Pro Main Unit
1pc * OBD Cable
1pc * Ethernet Cable
1pc * USB Cable
1pc * ECU Reflash Cable
1pc * Plastic Box



 

 

 

Our online supporting time from 8:30 a.m to 7:00 p.m EST 6 days a week.
We respond to emails 7 days a week, 24 hours a day.If you have any problems, please feel free to contact us. We will provide the best service for you.

   
Email Service  : ryancerrjeriatool@foxmail.com    
                             7days 24hours


 

    
Phone call Ryan: 008613528846322 (English)                                
  8:30 a.m to 7:00 p.m EST Phone contact information 


 

 
WhatsApp +8613528846322     (Ryan)

                                      


   
243151090zhoutao@gmail.com   ( Christina )

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Message Us