Remote Key FOB 2 Button 433MHz 4D67 Chip For Toyota Prado Avensis Tarago 120 RAV4 Kluger 2003-2009 Uncut Blade TOY43

New Remote Key Fob 2BTN 433MHz 4D67 Chip for  P/N:50171

High Quality

Condition: 100% brand new

Color: Black

Button: 2 Buttons

Suitable for the following vehicles:

for Toyota RAV4           2003-2005

for Toyota Prado 120   2004-2009

for Toyota Tarago        2003-2006

for Toyota Kluger         2003-2007

for Toyota Avensis       2003-2010

Must have  "20171" or "42050"   printed on your remote board or back of the cover. please open your original key case to have a check

The key need to be programmed and cutted at your local localsmith or dealer.

Remote part programming:

STEP1. Open Driver side door

STEP 2. Put the Original key in and out of ignition for 2 times

STEP 3. Close and open driver door for 2 times

STEP 4. Original Key in and out for once

STEP 5. Shut and open door for twice

STEP 6. Close door

STEP 7. Put Original Key in the ignition and Turn ignition on

STEP 8. Turn ignition off and remove key

STEP 9. Door locks will cycle

STEP 10. Do the following for all remotes:Press lock and unlock together for 1s, then press the lock button

STEP 11. Locks will cycle put key in ignition turn to on then off

STEP 12. Remove key from ignition, close door and test remote

To Delete All Remotes from the Vehicle:

At Step 7, turn the key on and off for 5 times then remove key, door locks will cycle for 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.

Program keys:

STEP 1. Put Original master key in and out of ignition for 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)

STEP 2. Open and shut door for 6 times

STEP 3. Remove original key and insert the new key (Do not turn the key, just insert it into the ignition

STEP 4. Leave for 60s (or til light goes out)

STEP 5. After 60s security light stops flashing then you can start car.

STEP 6. Take key out

STEP 7. Open and shut door

If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door.

Now you are ready to start again.