Car Lock Quick Opening Tool 2M2 Auto Locksmith Tool Turbo Decoder Hu92
TOP13012
HU-92 Turbo Decoder for BMW
HU-92 Turbo Decoder for BMW
Specification:
Brand New Car Lock Quick Opening Tool 2M2 Auto Locksmith Tool Turbo Decoder Hu92 for BMW lock 075003
1. The tool needs to be reset first: a. The rocker is pulled down to let the magnet suck, the red piece is pulled back to the bottom, the tool embryo is horizontally attached to the tabletop at 45 degrees, and the top piece is reset by the reset push rod. b. Push forward to the end. 2. Use the direction key to insert the keyhole to determine the tool insertion direction. 3. Insert the tool to the bottom (Note: the red chip must be pushed to the front when inserting) 4. Pull the red piece to the bottom of the back. 5. Tighten the tool clockwise with your left hand and the rocker with your right hand. Next time, release your left hand and let the tool return to its original position (or gently twist it counterclockwise). 6. Repeat 5. Action until the lock is fully twisted and unlocked.
Attention: # Insert the tool embryo or pull out the tool embryo", the red film must be pushed forward in advance; # If you can't open it successfully, please push the red piece forward and pull out the tool. After pulling out the tool, pull the red piece back and check if the top piece has been displaced. A. No shift: the blade is not on the top sheet. B. With shift: reset the tool embryo and re-operate once. Interpretation: Pull out the tool, pull the red piece back to the end, read the depth of the tooth. The reset bottom line represents the depth of the 1st / the intermediate scale represents the depth of the 3rd